Jaygo Incorporated: Special Offers

Double Planetary Mixer: Model TDPM-20 - 5 gallons

Jaygo Turbulent Blender: Model JTB-7 - 7 cu ft

Jaygo Double Cone Blender: Model DCB-100 - 3.5 cu ft

Jaygo Vacuum Pan Dryer with High Speed Lump Breaker: Model AVD 1090 - 30-60 liters

Guedu Vacuum Pan Dryer with High Speed Lump Breaker: Model Type 90 - 30 - 60 liters

Jaygo/Greaves High Shear Homogenizer/Emulsifier Tank Mount Mixer
Jaygo/Greaves Lab-C High Shear Homogenizer/Emulsifier

Jenag Liquid Strainer (explosion proof construction): Model 1200
Jenag Liquid Strainer: Model 1200

Refurbished Jaygo Conical Screw Dryer: Model DF-18-VD0

Jaygo conical screw dryer.
Model FF-45-VD0, 45 liter conical screw lab dryer with XP control panel

Jaygo conical screw dryer.
Model FF-45-VD0, 45 liter conical screw lab mixer/dryer with NEMA4X control panel

Jaygo conical screw blender.
Model FF-45-M0, 45 liter conical screw lab blender

Koruma Continuous Liquid Vacuum Deaerator - Model ERV/2
Year built: 1986
Construction: 304 stainless steel
Capacity: 1-3 liters / minute at viscosities from approx. 1-100,000 cps
Distributor Plate: Flat stainless steel atomizing plate with screens,
Drive: Via top mounted gear head motor. Final speed 875 RPM
Cover: Opened/closed via electric spindle motor. Cover includes vacuum, product, sight glass and light connections
Discharge: Netzsch progressive cavity pump with manually adjusted speed
Vacuum: SiHi water-ring vacuum pump
Controls: Motor starters, operator push buttons, etc.. mounted on skid, completely wired
Level probes: Endress & Hauser
Frame: Entire unit mounted on stainless steel base frame with casters and leveling feet.
Spare parts can be purchased from Jaygo
Manual and drawings are included
Click here to get a price.

Jaygo Vacuum Pan Dryer with High Speed Lump Breaker: Model AVD 1090
Year built: 1990
Total capacity: 90 liters
Working capacity: 30-60 liters
Construction: 316L interior / 316 and 304 exterior. Full vacuum design.
Double jacket: On bowl sides, bottom, cover, and bottom agitator. ASME stamped for 45 psig at 330 F.
Internal surfaces: Cleaned, ground smooth, and polished to 240 grit finish.
External surfaces: Cleaned, ground smooth, and polished to 180 grit finish
Agitators: One heated bottom anchor agitator, one top mounted saw tooth lump breaker
Blade Speeds: 15-150 on bottom agitator, 180-1800 on lump breaker
Shaft Seals: Bottom seal is dry running mechanical seal. Top is packing gland with lip seal on ceramic coated shaft
Motor: One (1) 10 HP and one (1) 1.5 HP, 230/460 V / 3 phase / 60 Hz, X/P
Controls: Purged Nema 4x X/P enclosure with VFD’s for agitator speed variation
Cover: Opened via manual hydraulic pump. Sight glass, light, charge port, dust filter housing, vacuum connection
Discharge: Manually operated plug valve with knuckle-joint lock
Spare parts can be purchased from Jaygo
Manuals and drawings are included
Click here to get a price.

Guedu Vacuum Pan Dryer with High Speed Lump Breaker: Model Type 90
Year built: 1986
Total capacity: 90 liters
Working capacity: 30-60 liters
Construction: 316Ti interior / 304 exterior. Full vacuum design.
Double jacket: On bowl sides, bottom, cover, and bottom agitator. Designed for 0-120 oil or water heating/cooling.
Internal surfaces: Cleaned, ground smooth, and polished.
External surfaces: Cleaned, ground smooth, and polished. Paint is acid/solvent/high temp paint.
Agitators: One bottom anchor agitator, one top mounted saw tooth lump breaker raised/lowered manually
Shaft Seals: Bottom seal is PTFE packing gland with nitrogen purge. Top seal is PTFE packing gland.
Motor: One (1) 10 HP 230/460 V / 3 phase / 60 Hz, X/P One (1) 1.5 HP, 230/460 V / 3 phase / 60 Hz, X/P
Controls: Nema 4 enclosure with motor starters
Cover: Opened via manual hydraulic pump. Sight glass, light, charge port, dust filter housing, vacuum connection
Discharge: Manually operated plug valve with knuckle-joint lock
No manual or spare parts are available from Jaygo
Click here to get a price.

Jaygo/Greaves High Shear Homogenizer/Emulsifier Tank Mount Mixer: Model GM-7.5/15
Year: 19988
Construction: 316 stainless steel
Mixing head: Disperser/Emulsifier
Motor: Two speed 7.5/15 Hp
Shaft length: 55”
Primary “Thrust propeller” mounted for downward pumping toward tank bottom
Second “Thrust propeller” mounted for downward pumping toward high shear head
Stellite stabilizer bushing
Stainless steel slinger plate mounted under motor seal/coupling
Spare parts can be purchased from Jaygo
Manual and drawings are included
Mixer is like new
Click here to get a price.

Refurbished Jaygo Conical Screw Dryer: Model DF-18-VD0
Working capacity: 175 liters
Construction: 316 Stainless steel.
Double jacket: On cone, channels on cover, and filter housing.
Internal surfaces: Cleaned, ground smooth, and polished to #4 finish.
External surfaces: Cleaned, ground smooth, and glass bead blasted
Agitator: One conical screw agitator, driven from top mounted gear drive
Speed: Variable from 8-85
Shaft Seals: Lip seals on ceramic coated shaft. Can be converted to single or double mechanical seals.
Motor: One (1) 2 HP and one (1) 1/2 HP, 230/460 V / 3 phase / 60 Hz, X/P
Controls: Nema 7& 9 X/P enclosure with pushbutton operators and motor starters
Cover: Sight glass, light, charge port, dust filter housing, and vacuum connection
Stand: Stainless steel frame with fork slots and lifting/lowering mechanism to drop vessel down (if necessary)
Discharge: Manually operated flush bottom ball valve
Spare parts can be purchased from Jaygo
Manual and drawings are included
Note: Orbit arm, top drive, and screw to be replaced. Once repaired and refurbished, it will be close to new. Newly replaced parts will carry full 1 year warranty.
Click here to get price.